Brake pads Ferodo or Mintex

I like the Ferodo DS2500 for street/canyons, tho I find they’re pretty dusty.

If you have 312 mm front rotors I'd suggest to upgrade to FER-FCP4433G

DS3.12 pads https://www.brakes-shop.com/fer-fcp4433g-ferodo-ds3-12-brake-pads-front.html and Motul 600 / 660 brake fluid (or Castrol React SRF).

With this setup you will be limited by your tyres and suspension.

Don't buy DBA rotors and pads or EBC pads. You will destroy them (like crack in pieces).

Don't run with OEM fluid or pads \u2014 you will definitely lose stopping power relatively early on.

Back in May I swapped OEM pads for Ferodo DS2500 for my first track day in my GR86. Otherwise the car is bone stock. I noticed some slight pulsing of the steering wheel but only during hard braking (100 to 30mph). No brake fade that I noticed.

DS2500’s were the best hybrid pads I’ve used. But I only did 1-2 a year.

Gt4 brake pads ran me about 1000-1100 for ferodo ds3.12.

Ferrodo DS2500 is probably the best dual duty pad.

Vanno verificate le pinze, c'\u00e8 sicuramente un problema di scorrimento.

I daily and autox ferodo ds2500, pretty happy with them, more dust and noise than an oem pad but can withstand light track work. Doesn’t sound like an awful bus/train but the occasional squeak happens.

jai des ds2500 et mes freins sifflent tres fort cest chiant

I had a track day today with 1 hour session and closer to the end they were fade.When I took the pads out to check I noticed that they are extremely glazed like covered with a melted metal.Also, looks like they covered rotors with this melted metal, the inner side of both of them.The outer rotors surface is fine. The outer pads look the same glazed.I was checking them yesterday last time and they looked fine.The friction material looked fine and not that glazed.It's on the last photo.I was trying to brake short and strong all the time.There car is Suzuki swift sport.Brake pads ferodo dsuno.Track Zolder.