Brake pads Ferodo or Hawk Performance

Porsche Cayenne (18Z) calipers in front w/ ML55 345mm rotors & Hawk HPS pads 034 Motorsport 300mm rotor conversion in rear w/ new calipers & Hawk HPS pads Braided stainless brake lines all around Brake fluid flushed and replaced with Motul RBF 600 ST coilovers (KW's entry-level brand)

I do really like the Hawk HPS pads. They cost a little more, but I think they are worth it.

I had the stoptech then switched over to Hawk HP Plus - best decision I've made. They're not exactly quiet but tolerable (in my opinion) - they bite awesomely though.

Currently on my EP3 I'm running the spoon monoblocks behind enkei rpf1's as you can see here. With Brembo discs using Ferodo Ds 2500 brake pads. Also running Hell braided lines with motol 600 brake fluid.

I would recommend Hawk HPS pads. They bite instantly, so they could be a little noisy if you don't grease the backs. They aren't great on dust, but you will always have a lot of brake dust due to the size of the brakes. The performance is probably the best available for non race applications. I have never experienced brake fade, but I do have a heavily modified brake system.

i decide to swap for BBK Discs front mercedes GL 350mm drilled Textar's i pads Hawk Performance 5.0 rear discs 310mm drilled Textar i pads Hawk performance 5.0

I have scirocco 10.1's up front and 8(?) discs out back with mk4 calipers. All four have Hawk HPS pads I believe. They're more than enough stopping power, OEM, and very affordable if you buy them on vortex, ebay, or a junkyard.

R32 front brakes with hawk pads (installed at 25k)

I did install Ferodo pads as well as the brake fluid flush at local Audi Dealership, however I do have some pulsation when I brake from higher speed. It is non existent in the city driving but on the highway my brake pedal pulsates a bit and I don't like this.

I swapped out the rear pads on my 2017 Mk7 Golf R following the instructions for doing so with OBD Eleven Pro to a "t" and still wound up with a plethora of error codes. I installed new (Ferrodo) pads