Brake pads Ferodo or ENDLESS

I've got OE spec ferodo on my 208 GTi no complaints from me, got brembo on my Saab 9-5 aero again all good I would avoid the cheaper end of the market

Ferodo DS2500 were good in my daily/tracked GTI and track NB Miata, until I got GLOC track pads on the latter. Which are awesome. BUT the DS2500 held up to the track really well, I'd definitely say for a daily that gets tracked they're about as good as you might get. Grease the contact points on the pad with copper or other compatible grease and i think they don't make much noise at all.

I'm running Ferodo DS 1.11. and they're fine on the streets even during winters when it gets even as cold as -25C

I got their vented rear and front rotors (Girodiscs) with stock calipers and Ferrodo DS2500 pads all around. For a stock powered car they work great at VIR. I have done 2 sessions there now and braking is pretty decent. On the street this combo will never fade period. The rears overheat which overload the fronts and cause issues. Rears overheating also causes the wheel bearings to go out so getting vented rears is just smart.

I’ve been told by some very experienced S2000 drivers that this is the best braking setup outside of a BBK. It’s streetable as well, if you don’t mind a bit squeaking. Make sure to burnish/bed the pads in beforehand for better performance.

Ferodo DS2500 are a classic high performance street pad, every time I go through a set I am sure something better must have come along and do some market research, always end up back on the DS2500´s as an everday/occasional track pad. They are cheap and they last forever (really) relative to punishment taken, they are dusty though, that´s really my main issue with them.

If you can't find ceramic pads, get Ferodo Premium Eco Friction.

Many people don't like ferodo pads, but I use ds2500 for dual duty, but they can be hard to find. Just got to be careful getting off the highway with them when they are cold.

Up for sale are new Ferodo DS2500 brake pads for an MK7 Golf R. I had bought these to replace my noisy new Hawk pads, but have decided to just stick with the noisy hawk pads.

I put some Ferodo DS2500s for a HPDE event at the end of July and noticed discoloration and crumbling on the edges. Swapped them out with PFC08s for this weekend’s HPDE and noticed chunks of material missing from the inner of the pad.