Brake pads Ferodo or ENDLESS

Endless MX-72s are a good example.

I reckon Endless MX72+ are the go for daily driving or Project Mu.

Ive been running the ferodo DS2500 and it seems to work well for occasional track use and mixed daily as well. Not too noisy on my older 911.

Endless mx72 are really good as a no noise hybrid pad. I recently switched my fronts to endless me20 for a more task focused pad and they have great feel and no fade. Much noisier but that's to be expected.

Right now I use Ferodo DS 3.12 on RE71RS tires. They are pretty high bite and take some getting used to. I might go a rung lower on the friction scale and go with DS 1.11 next time because of that. But the DS 3.12 are unfadeable and very consistent.

I get mine for my AZ swift sport from RHD Japan. 3 track days and no fade etc. no squealing. A bit of dust. Endless CCrG. If you’re not tracking it then get Endless MX72+ Or Project Mu HC+ Locally you may be able to get EBC yellow stuff.

Ferodo DS2500 are a great compromise pad. They’re a bit more on the race side of things but I never had issues with them being sketchy. Just get a bit of heat into them early to make sure they’re there.

Recently completed my HPDE and by the end of the day my stock pads were completely gone. Got my front rotors and all my pads replaced soon after that. I went for the Ferodo DS2500 pads. While bedding my pads, I noticed the brake feeling/bite is quite nice when braking at around 50-60% pressure, but once I tried emulating track style braking (i.e hitting brake pedal very hard) I noticed that my brake pedal was vibrating/rattling and also felt some sort of scraping was going on. This would happen even when hitting brakes hard from low speeds of ~30 mph. It's felt entirely on the front brakes. ABS did not engage, so I don't think the vibrations are from that. The obvious visible difference I see is the use of high temp brake lube from the shop.

Ferodo Ds2500 as brake pads or Ebc Yellostuff (a tad cheaper). Avoid drilled or grooved rotors because kinda useless. Just a good oem equivalent like Brembo (if in you market have CTF go for it)

I ran the MX72s until I melted them onto the rotors as well.