I also upgraded brakes to Optimal brand e-cote rotors and EBC Red street/performance pads. A nice improvement in brake feel and the new rotors look better, but hardly necessary.
Calipers cleaned up with new EBC pads, as well as a complete fluid flush.
Just had Stoptech slotted front rotors, EBC ceramic brake pads and Motul DOT 5.1 brake fluid installed on my 2016 GSW....BIG improvement at reasonable price....
I just had Stoptech slotted rotors & EBC ceramic brake pads installed in front along with Motul 5.1 brake fluid -- great improvement in stopping power at a reasonable cost
The best solution I have found is to use slotted rotors--cryo treatment typically gets me 10K more miles before hard spots develop and I get a pedal vibration--and an aggressive pad without any ceramics. My solution is to use the best quality slotted rotor I can find, cryo treatment preferred, and use either a Wilwood BP-10/20 pad or a Project Mu NS brake pad. I found those two pads were aggressive enough to have great stopping power and would wear out the rotor at the same rate the pad wore down.
Mine were equally grooved, if not more so. The stock pads have a high metal content and this eats away at the rotors. I recently changed my front rotors and pads for Stoptech Slotted + EBC red ceramic pads. Rotors are noticeably higher quality, and the pads are pretty good as well, though they dust considerably more than my stock ones did.
EBC pads come with special brake-in layer to deglaze rotors. And this is what they recommend (came with pads): I have them on my Tig. Excellent low dust, high performance pads.
OK lets stir it up. I have a 2017 R and like many of you the dust on the front brakes was awful. So I decided to get EBC REDS. Great pad very low dust (still some) but bedding them in probably like most was a puss on reak in.
Yellowstuff lastet one track day (6 sessions of 30min) and maybe 200 miles to get to the track. It went metal to metal about 5 minutes before end of day. I liked the bite they had and I had absolutely no fading
The new clips that came with my red stuff pads is junk. They don\u2019t hold the pad in place for nothing.
Write your review
Help others - share your experience with this part.
