Brake pads Carbotech or OEM Mercedes

I've been to 20 track events to this day I'm still running OEM calipers. Just carbotech pads. You don't need a big brake kit at all. The oem cracks because of improper cooldown. I learned that after a session to take my cooldown lap seriously and ever since then i stopped cracking AutoZone rotors

I ran stock rotors for a long time with carbotech xp10/8, front brake ducts, stainless lines, and Motul 660. The XP10/8 + ducts was sufficient for 20min session the tracks I drive.

Mercedes-Benz E55 AMG. Nothing particularly bad but having a German for it's age, essentially a supercar, and close to 200,000km when I sold it, quite a few bits and pieces needed replacing. Mechanically the best car I ever owned though. Just hoses, sensors, bushes, brake disc's and pads that kind of thing.

I'm using carbotech xp8 on my 3800 pound sedan. They've survived 6 days at the track plus occasional driving around town for a year.

Hey, I track. MK7.5! The floating calipers flex which means you get more pressure on the outer half of the rotor. It's annoying but it's not a problem in my experience.

Something like a Carbotech XP12 pad might do better with the heat but adding brake ducts from the RS3 is cheap and will help quite a bit.

Girodisc should have a 357mm disc available when you've gone through the OE rotors. They're slotted instead of drilled and are 2 piece (aluminum hat).

I am currently using Carbotech XP10's in front and the XP8's for the rears. I really like them and have not had an issue so far. Plus the company has great customer service. They are definitely NOT a street pad, and I need to swap them the night before a track meet and put street pads on the day after, but the effort is worth it.

I just replaced my pads all around with Carbotech so i get majorly reduced brake dust and just OEM rotors.

If you KNOW you're going to be doing a lot of track days, you definitely want to go straight to some full blown track pads, at least for when you're at the track, along with fluid.

I run carbotech xp8 on the front of my c5. Still a group 2 level driver. They’re a good pad for a car that’s driven to the track and home, but dirty and noisy at times for a street pad. They’re considered entry level track pads. I chew up rotors but don’t get fade, but my local tracks aren’t particularly hard on brakes

I used Carbotech brake pads, but they dust and squeal like crazy, so other options may be better.