Brake pads Brembo or STOPTECH

He also really likes the responsiveness of the brakes.

Highly recommend stoptech street performance pads edit: not if your dust averse which it seems you are

...or Stoptech Street Performance pads. Very good.

I've been thoroughly impressed with stop tech pads on OEM rotors. Definite improvement over stock while maintaining the same dust level(a lot). I would not mind doing golf r brakes or tt rs brakes up front next time around.

For pads, I've had the Hawk HPS and StopTech's. The HPS seem to have a higher total clamping force, but the StopTech's have a better bite and feel.

Brakes.. It's been said, but cost more to replace, are heavier but more powerful, so an advantage from that standpoint.

GermanAutoParts.com has front BREMBO brake pads available for 1986-1989 Scirocco 16V models. Brembo's premium ceramic compound provides increased stopping power and reduced dust combined with quiet, smooth operation. The multi-layer shims minimize noise, vibration and harshness for quiet, smooth performance. Brembo Ceramic pads are an excellent choice if you want to minimize dust and noise while increasing braking performance in general street use.

Hey, I just did this. I'm not sure what your budget is, but these prices are pretty reasonable. You'll be paying less than you did for just the fronts, for all rotors and pads. brakeperformance dot com for rotors - blanks, slotted, cross drilled, dimple drilled, cross drilled and slotted, and dimple drilled and slotted. I snagged all 4 for about $200 -- Free shipping! Realistically, drilled rotors are a thing of the past, in terms of necessary...although, they do look fun! ha carpartkings dot com for pads - StopTech pads. I got front and back for $117, total. -- Free shipping! I have a GLI and I believe the part numbers differ from mine to yours, but they're close in price. If anything, yours may be cheaper. Pads arrived in 2 days. Rotors took around a week. Are you planning to do the work yourself, or are you just looking to buy parts and then pay someone for labor? If you're looking to do the work yourself, let me know. You'll need a few other (cheap) items - caliper grease, anti-squeal paste (some folks don't use it), m14 triple square bit, t30 torx bit, and a piston reset tool or c clamp or pliers. Piston tool can be rented from autozone or other auto parts store or you can find them online. I've never used one, but I hear tale it's easier. I was going to try to use it on mine, but have not.

I have the R56S brakes on my R53, and I've had Brembo ceramic pads and cross-drilled rotors since I installed the calipers a little over a year ago. I'd recommend the pads, although I can't comment on how much they dust, because I have white wheels and any dust on them seems like a lot. The drilled rotors look awesome and perform really well, but my issue is that they have slightly warped since I put them on last year. If you decide to go the Brembo route, I'd probably recommend doing the slotted rotors instead of the drilled to prevent the warping.

just swapped out my original brake pads and rotors for some oem rotors with the brembo aftermarket pads hoping to avoid the dust that the original trw pads creates. all went well with install, everything seemed to fit nicely, but after about 10 miles the pads started jumping up and down in the carrier any time id hit a bump in the road. ive seen the threads talking about this issue with certain aftermarket companies, but figured id put it out there that brembo is another one that seems to have made their pads just a tiny bit shorter than original giving it enough room to slide up and down. side to side is fine, but the noise is unbearable for what it is. threw my oe pads back on and will be getting a new set of vw pads in the am. cant stand the dust but its wayyyy better than the car sounding like it did with those pads. these companies need to include shims or something.