Brake pads Brembo or OEM Nissan

I have on my front axle the AP Racing CP7600 BBKs. Works like a charm especially with Brembo ceramic brake pads. Only downside is the rust-like brake dust that comes out of the ceramic pads, causing my black rims to look rusted when it isn't. Nothing a car wash can't solve.

I order from Brembo or Brembos's from rockauto, same as what came on the car at less than 50% of the Audi price

I did a 288mm to 312mm upgrade on my wife's Golf wagon and used cross drilled Brembos with Brembo pads. Love the brake feeling with good bite.

That being said I use brembo pads on my mito which work very well, wouldn’t be that far off for the Giulia

Had Brembo. No complaints.

Amazingly, after 24.5K miles, i was down to 2mm on my front pads. I do live in Seattle and on a steep hill and drive with a heavier foot, so go figure I used up my brakes. Decided to put in Brembo ceramic pads and rotors for fun. Braking is different from stock. It’s definitely strong, yet, the initial bite isn’t as aggressive as OEM. I’ve grown to like this as it lets me be more precise with my braking. I can simply slow down lightly without drama, but push more and the brakes grab strongly and uniformly. They just feel more engineered.

I ride a Gt535 it has no ABS no rider modes none of those fancy electronics, but its got Brembo sintered brakes. They work flawlessly and bring the heavy machine to a stop.

They wanted like 3k for Brembo front brake pads and rotors for my scat pack at the dealership. I just got power stops instead and had them installed for less than 1/6th the price. The dealership told me Brembos are always on backorder so they jacked the prices, idk if that's the real case... But they were disgustingly expensive. Imo, the power stops feel the same and the rotors are holding up better. My brembo rotors warped before 20k miles of daily driving (mostly highway)

Brembo low dust pads and oem rotors on my 330ci. Rotors tend to warp easy on these so I figured I'd stick with bmw.

I replaced the front brake pads on the F56 LCI2 Cooper S with Active cruise control and bought the Brembo P06 093. The pads seems to be a bit smaller than the OE ones so sometimes they make noise on rough roads. They also came without the back part to cover the caliper piston and they make an awful amount of dust.