Brake pads Brembo or EBC

Brembo make some fantastic road-orientated sintered pads, they improved my Street Twin loads.

I went with EBC drilled and grooved with yellowstuff pads I think. Highly recommended

I’m rocking EBC RedStuff and I love them.

These are amazing pads - really big upgrade in stopping power. And as others mentioned, it’s per pair. So one of each. Tdotperformance is reliable, I use it specifically for pads and rotors for not just my vt but other cars I have worked on. Great service and vehicle confirmation.

The yellow stuff pads are also Canadian winter friend. They have similar biting power to the reds but better for cold bite. Only downfall with the yellows is brake dust is fairly high. My wheels get very dirty. High maintenance for cleanliness.

I have EBC slotted rotors and the green pads. Way better than stock. Will probably go with red when these wear down cause they claim to produce less dust.

Running coated rockauto rotors (rust belt life) and brembo ceramic pads. Stops well for under 250 for all 4.

I have about 45k miles on a set of EBC greenstuff and StopTech slotted rotors. I’m not hard on my brakes and my pad life is still good. Much lower dust than stock and roughly the same bite/engagement as stock. Maybe slightly more sensitive.

Brembo Z04 is very expensive but is the strongest pad you can buy

Vesrah RJL-ZZ is cheaper and can offer decent bite and is fairly linear pad, XX is stronger but also more progressive

EBC GPFAX is a good pad and cheaper, kind of similar to the ZZ but slightly less feel and weaker

I've used them on track in NASA HPDE3 group. They are pretty much equivalent to the Hawk HP+, for a lighter weight car they are fine for track days but for a heavy car you will need a more race oriented pad.

I replaced the front brake pads on the F56 LCI2 Cooper S with Active cruise control and bought the Brembo P06 093. The pads seems to be a bit smaller than the OE ones so sometimes they make noise on rough roads. They also came without the back part to cover the caliper piston and they make an awful amount of dust.