Brake pads ATE or OEM Nissan

I used ATE ceramic pads on my mk7 pp and so far they are great. Barely any dust, no noticeable wear on the rotors after 3k miles, and no extra pedal pressure required.

stick with ATE or akebono. both good for their price. have ran both on my e39 and they work great with their respective rotors

FWIW I wound up with those Brembo front and Zimmerman coated rears with ATE ceramic pads and I’m very happy with it. To me the stock setup is grabby at low speeds and these are much smoother. I don’t feel like I’ve lost any stopping power. Huge difference in brake dust.

I literally just did exactly this.. Had the BRAKE warning light on the dash and replace rear brakes on Idrive message on my 2019 X3 M40i at 32k miles.. rear rotors looked fine to me.. they were smooth and not grooved.. so i bought OEM ATE PADS and a BOWA rear brake sensor.. $128 shipped from Pelican parts and i was charged 1 hour of labor ($135) at my local Indy shop.. as others have mentioned youtube is your friend.. just a rear pads replacement is a pretty easy job w basic tools.. I should have done it myself but I decided the $135 cost was not worth my time and effort.

with only time and not use, it should be okay. think of it like putting new brake pads but with rotors that are still within service spec.

During this time I also replaced the brake pads with oem ATE one’s (low dust) and oem brake fluid flush.

Regular carbon ceramic brake pads, from Ate and I presume also Brembo, are better than normal pads. Same stopping power but much less heat generation and brake dust.

Brakes feel fine when driving, but after they cool and I go out again, the pedal feels spongey. A few hard stabs and it returns to normal, until I come in and let it cool. No fade while driving, and pads survived despite having been on the car for over 2 years of road use, although they need replacing now really.

Nissan brakes are on this squeak train as well. We barely have a remedy for it, other than ‘regreasing’ them. I tell my customers that the pads are designed with materials for better braking and less dust, at the cost of noisy brakes when cold.

I noticed my M3 HB 1.5l 2020 (second hand) has rear ATE brakes. The car has 29k km on the clock and at 10km/h I can hear intermittent squeaks from what I'd assume are the brakes which sounds like there's some contact between the rotor and pads at specific point and only seems to happen when the brakes are warmer so no idea what's going on there.