Brake pads ATE or Hawk Performance

Hawk DTC 70 or 60 are great and not too expensive, plus they didn't squeel for me on the street.

Hawk 5.0 Street Pads, if u want to do a mix of street, spirited and track driving, I run them on my GR86, and no issue. Though they do squeel a bit when its cold out.

i run HP+ for track days, will be doing my 4th on them in a few weeks. they are plenty for my level of driving. i take them off after my track day because they are loud and filthy. but for on-track, they are perfect.

I have dtc-60 on mine. They’re great track pads, but overkill for your first track day. They’re comically squeaky if you use them around town and def not made for that.

I run the 60s in the front and stock in the rear. The 60s are a lot of braking power specially for your first time. I would not recommend the 70s that will be way too much. They are dusty but I'm at about 50% life on 5 track weekends. One weekend the car almost never shut off. If you are really using them make sure to give them a cool down lap or they will smoke.

I have the dtc60 with rbf600 fluid. No fade at all. Would recommend. If you're tracking only once a year though, make sure to swap back to street pads. The hawks dust a ton and squeal veeery loud.

Been on Hawk HPS 5.0 for over a year now. Good feeling pad.

We use ATE here in Germany. Rear brake pads will probably require a diagnostic device to disengage the electrical parking brake.

Sounds like way too much for a basic A200. For a dealership I guess it's normal but you can get equal quality ATE brakes for much less than the original Mercedes parts.

Happens to me as well on the track. The Hawk “ street performance” pads I used aren’t cutting it.