Brake pads ATE or Carbotech

For normal driving I'd recommend either ATE Ceramic pads, paired with ATE, painted or coated discs.

Get Ate ceramic. never (almost never) have to wash your wheels again

Brakes and hoses ATE.

I had the same problem with my c8 z51, I switched to the Carbotech 1521 pads and they solved the problem. Would definitely recommend

I had an issue with severe brake dust from the OEM pads on my Z06 Corvette. I replaced the pads with Carbotech 1521s and the dust was eliminated. Made a huge difference with keeping the wheels clean and the pads preformed better.

I also suggest you to buy ATE or TRW pads, because cheap stuff might squeak.

If you’ve still got UFO fronts the part number for pads is ATE 602847 (13.0460-2847.2)

Meiner Erfahrung nach bremst das genauso gut wie andere Bremsen, das Problem ist nach 10tkm sportlicher Fahrweise sind Bel\u00e4ge und Scheiben leer, normale Fahrweise max 20tkm. Felgen Kohlschwarz weil nat\u00fcrlich mega viel Bremsstaub in kurzer Zeit.

im running XP10s... so far this set up is amazing, the braking is strong initial bite with little fade. Just take in consideration that this Carbotech pads are modular which means you will have a slight longer pedal travel than normal. And yes they are super noisy, when i drive it on the street i try to be careful with my braking and not feather the brakes, that will make then literally screech and grind the rotors, instead i try to brake a bit harder than usual to get a good bite and then let go of the brake once i stoped (put the car in neutral most of the time or creep forward little by little to releave some heat).

Hatte mal teure ATE Bremsen die sofort verrostet sind. Nie wieder.