Brake pads ATE or Carbotech

ATE und Schluss aus. Damit hatte ich immer top Qualität und nie Probleme.

I use Carbotech xp10 in the front, xp8 in the rears. Love them. Semi heavy car but they feel great the entire weekend. They are very loud on street though

I went from EBC to Carbotech. It’s a night and day difference. I’m running XP8, but my car is very light.

I just put some ATE pads on the rear. High quality for only $30.

When you need brake pads and rotors get ATE.

I used ATE ceramic pads on my mk7 pp and so far they are great. Barely any dust, no noticeable wear on the rotors after 3k miles, and no extra pedal pressure required.

I've been to 20 track events to this day I'm still running OEM calipers. Just carbotech pads. You don't need a big brake kit at all. The oem cracks because of improper cooldown. I learned that after a session to take my cooldown lap seriously and ever since then i stopped cracking AutoZone rotors

I ran stock rotors for a long time with carbotech xp10/8, front brake ducts, stainless lines, and Motul 660. The XP10/8 + ducts was sufficient for 20min session the tracks I drive.

I'm using carbotech xp8 on my 3800 pound sedan. They've survived 6 days at the track plus occasional driving around town for a year.

YES! i have the same issue and its mental. DBA Slotted Rotors and the Street Performance (Green) Pads, clunk over bumps and when moving back/forward D/R etc. Rattle is 99% from the left side / without the depth check. DBA said to extend the shims so they stick out further, and it works temporarily for about a day, then back to normal. Everyone is recommending the ATE pads, so I might try them, but if these rattle too not sure what to do...