Brake discs Brembo or TRW

Got these on my Corolla, they're actually good for reasonably cheap brakes.

i was on the fence about buying them and i did a bunch of research and after speaking with my buddy who is a mechanic and owns a tundra he said that the powerstop brakes aren't great and if you don't have the money to do the tundra swap, to get the brembo rotors and either akebono or brembo pads. ive been driving with this setup for about six months and have had no issues. the braking feel and stopping power has noticeably improved.

The best stopping combination so far on my 08 sedan with 140K is Brembo UV Coated rotors and Advanced Auto Parts Carquest Wearever Gold Semi-Metallic Brake Pads Previously I had Zimmerman rotors and Hawk HPS pads, I got a grinding feeling/noise when stopping. The Carquest pads dust like OEM but for the stopping power and smoothness/linear feel I will put up with it.

Best bang for buck brake setup on a Corrado/Mk3 Front: 11.3 DE's with Tyrol Sport Bushings and a proper pad and brembo OE rotors Rear: Stock rear, Mk4 Calipers, proper pads, and brembo OE rotors. Rotor material is too often overlooked and a must for proper performance. Brembo seems to have the best metallurgy IMO.

I did buy replacement rotors (Brembo) and pads (Bosch quietcast) from FCP and I have no complaints.

I have solid BREMBO rotors, girling calipers and I think that you can get slotted rotors in the 'solid' width....just a different kind of venting.

The best rotors for the money aren't slotted or drilled, is the honest truth. Drills and slots are supposedly there to relieve the film of gas that comes off of hot brake pads and forms a low-friction cushion between the surface of the rotor and the surface of the pad; the reality is that formulations in brake pad materials in the last twenty years have reduced this gas by 90+% and have rendered slotted or drilled rotors as an aesthetic option, not a performance option. If anything, slots and holes lead to increased brake pad wear, higher likelihood of rotor warp (I've experienced it first hand at the 2011 Fastivus track day riding shotgun in someone's MkIV R32...over the course of a few laps, his slotted rotors went from smooth to warped enough to be garbage; post-session inspection showed they visibly warped at the slot lines) and higher likelihood of cracking and failure around holes as well. What's more, depending on the pattern of holes around the face of the rotor, you'll develop uneven wear across the brake pad surface, actually reducing the area of pad-to-rotor surface contact area over time. Only the best (usually patented) hole patterns avoid this issue, Porsche's proprietary hole pattern being one I know of for sure. The half-slotted/half-drilled rotors are the worst because the holes are placed in a geometrically symmetrical way on the rotor face, not in a hole pattern that is best for the life of the pad...purely "for looks" and honestly a garbage choice. Brembo plain rotor OEM replacements are the most expensive direct-OEM replacement rotor but are, IMO, worth it (I put 80,000 miles including several track days on my 11.3" Brembo plains and they held up very nicely). ECS is selling Genuine VW/Audi rotors for $190 a front pair which are probably your best bet (OEM = Brembos, at least on my GTI...whatever they use, it's not a bad disc at all). Getting a disc with curved vanes instead of straight vanes should help with disc cooling and longetivity, as a general rule. As for pads, you'll get a lot of different opinions on that. I like my Hawk HPS a lot, I know people who adore their Ferodo DS2000s and DS2500s. You're going to hear rather mixed things about EBC Greenstuffs but there are a lot of people that like those too. Porterfield is a very reputable brand though I'm not sure if they offer anything that's especially street focused or if they tend to just market to HPDE/Autocross/Road Race use. I came to the conclusion a few years ago that Mintex is kinda cheap and not that great.

I know my Brembos cracked like a Mofo. They are still kicking ass and unwarped though

On my old '93 300ZX, my brakes were shot so I had specifically ordered Brembo (solid) rotors, Hawk HPS pads, SS brake lines and the blue performance brake fluid. honestly, I really never felt that the brakes were that much better than oem.

The front rotors were in a box from Zimmerman and rear were from Brembo. Just about from the start the brakes slightly squealed. The noise gradually increased that nearly each time the brakes were stepped on they squealed. After about 2K miles the noise got to the point of being excessive. They squeal in the morning when cool when slowing from 20MPH or warm and hot when slowing from 45+MPH. The only way to make them silent is to slam on them hard, but the next time they will squeal as well. In addition to the noise, the rotors started developing rust on the hub sections.