Brake caliper OEM Porsche or OEM Audi

I'd go with Porsche calipers on stock rotors, which is what I run. MUCH improved pedal feel and modulation, ability to swap pads without taking the caliper off, and more pad options.

I've got an Audi A4 Quattro that I DD, Autocross and teach HPDE ( Track Days ). Originally I tried the TT carrier / A8 rotor (312mm ) upgrade. I later switched to Porsche Boxster calipers because I was getting pad taper on Track Days.

i have the audi twin piston caliper/G60 rotor setup in the front of my 16vT GLI. i think theyre great, i can lock up the brakes at 50mph if i want so braking power is def not an issue.

Rear calipers are a Porsche 944T, the disks in a VW Corrado / Golf G60, 280mm, 274mm lowered to the clamps are anchored with an adapter for Grinling54, is to lower a bit with the grinder, but it is simple

I currently have 12.3" Audi TT rotors with Porsche 911 (996) calipers. Those brakes works fine, but I want smaller brakes so I can fit 15" wheels.

I'm running the audi calipers and G60 11" rotors and drums in the rear. love the brakes on my car

I used some dual piston calipers from the Audi, and the fit under my 15's with like a quarter inch clearance. These are more braking power than is needed. The pads are much larger than the stock pads, and if you really step into the pedal they will lock the tires up at any speed!

These calipers came off an audi 5000 turbo and each caliper has 2 pistons (dual piston) this means you will get a great amount of breaking force with each pump. These are a GREAT UPGRADE for your track car or daily car without having to spend so much money to get aftermarket brakes.

I run TT rotors with Boxster calipers. I like this setup very much. Brake pedal is a little firmer than stock and they are easy to modulate on the street.

The biggest problem with the Girling 60s is the weight, and the fact that the calipers are designed for 10 5/8" rotors, so they aren't a perfect fit with Corrado G60 11.0" brake rotors that they are used with.