Owner reviews for spark plug

Im with the Densos already and the spool and throttle response is so much better. Even with gap 0.075mm they are much better.

I have the beru side firing and they work just fine.

I've always used NGK in my hondas and never had any problems. They're OEM equipment on most (if not all) imports so I would recommend you just stick with what works.

As for the BKR7E's. It's proven that .028 gap is what you want with a stage 1 or 2 setup, and 0.032 for stock. No need to experiment. I've used these plugs on both factory coils and my current setup (OEM Bosch B7 2.0T coils) with no issues.

i put another set of bkr7e's but with 0.80mm gap, the car is running a lot better now.

I installed the BKR7E gapped to .028 with no issues. My vehicles seem to favor NGK more than Denso.

Another BKR7E user. Never had any problems with them.

Not sure what exactly your setup is/how well you have tuned for it, but on BKR7EIX plugs @ .028 and 25psi, I was encountering some spark blowout. Basically felt like the car dropped 2 cylinders, and my exhaust had muffled misfire sounds that basically sounded like a very fast skipping CD of fart noises lol.

the densos work fine, the point of swapping is not for any performance gain, rather to prevent shattered ceramic from raining into your cylinders

I said from the get go that the Densos were running like ****. Especially at wot around 110mp/h it felt like the engine was hesitating and lacking power. Idle was smoother with the Denso though.