Reviews of OEM Honda brake pads

After bringing the knuckle back, we reinstalled the brake pads. We had a difficult time getting the pads to sit correctly, specifically with the anti-rattle clips (prongs). Eventually, they seemed to seat properly, and we reattached the pads and caliper.

I did have VTC rattle on startup but it went away before I could get around to fixing it. I also had the injectors fail, which were covered under that warranty recall. Also have a leak on the inside of the vehicle from a rear speaker gasket, that will be fixed when I get around to it in the coming weeks. I only learned I had a leak because the interior was moldy and moist. My brakes failed on track mostly likely due to me overheating them, and not properly cooling them down. I ended up melting the O ring on the piston itself. Never really got to diagnose what the issue really was just what I saw and felt. Replaced with "Integra Type R Big Brakes and a Mini Cooper Rotor". Somehow my compressor clutch wire was chopped in half, which caused me to replace the compressor. Though I probably could've just fixed the wires, but I already bought a new compressor so I just replaced it.

Replaced front and rear pads once. Front pads didn't need to be replaced, but I had them anyway so I swapped them out.

Replace Brake pads front P2000

I've done about 4000 miles on it this year and it's really grown on me. It's comfortable enough, the brakes are really good, the abs isn't overly intrusive. The handling is decent, the geometry is definitely more about stability than agility.

For the record, my wife has a 2014 Honda Odyssey with 175,000km on it and she's had zero problems aside from normal stuff like changing her brakes and whatnot. That thing is a tank.

Alright to offer some professional advice from someone who works on these for a living. The front brakes are 95% or more worn, it's a little unclear but at best there is about 1mm of brake pad left and new I believe the pads come at about 11mm.

Issues included brakes dying (out of brake fluid, pero may tagas din yung hydrovac)

Rev matching is better for the brake pads... and it sounds cool lol. Same reason I rev match downshift in my Honda Civic.

Finally did brakes all round last year...had been warped for a long while, but held up well