Timing belt Gates or OEM Audi

I used a gates (rpm) belt , its expensive ($80?) but i feel like thats a part you dont want to go cheap with !

We have a gates timing belt in our 04 Jetta that was placed Dec 2010 and 72k miles ago. Going to change it here soon with a new one this spring. Its accessory belt is gates too. My 06 Navigator has a gates drive belt. Brother in law’s BRZ had a gates belt.

Timing belts arnt as bad as people say. Just pay attention to detail. I’d just say, make sure you do all the tensioners and everything else that connects to it, there should be a full kit of all the parts.

Go with Gates, it’s the OEM and you won’t find anything better than that for those parts

Thats a gates replacement,done at the required distance.,100k

That's a gates timing belt which is a high quality aftermarket belt. It is not OEM and has been replaced. It looks like it was replaced at around 100k miles which is spot on.

Those cracks look worse than what mine did. I had gotten my car at 134k mileage and I changed my belt at 180k but to be very honest I think my belt had been on there for much longer before I owned that vehicle and I think I got lucky it never snapped into pieces.

Was able to get the new belt installed with a little less tension but still less than 90* of flex. It till popped a tiny bit during crank rotation, but I decided to go with it, have driven it for about an hour or so, put it through a couple heat cycles all while checking it every 15 ish minutes. First couple times I checked it, it was kinda tight, last couple times I checked it, it felt ok, so idk.

I've had gates belts do that in 20k.

Gates timing belt broke and took out the engine in my old 2009 legacy with the sohc 2.5l. It was only installed for about 5 years and 60k mi / 96.5k km. Don't skimp on the most important belt your engine has, buy genuine subaru.