Spark plug NGK or OEM Mazda

Same exact plugs I use they haven't given me any issues I have em gapped to .022 and no misfires at 31psi, the car made over 600whp with no problems with these plugs, and they cost about $3 a plug.

DCPR8E NGK copper. we use stock gap and change every 10k-15K miles. So far so good for me. 12psi fyi.

I still use stock gap on my DCPR9EIX on my turbo R with no missfires.

Running NGK DCPR9EIX gapped to .022" with no misfire issues.

The 9s are good. Considering I have run them anywhere from 15psi to 36psi of boost and they have performed flawlessly I would say that they work well.

I replaced the spark plugs earlier. The new spark plugs is NGK PFR6Q from Checkers. It is gap @ .032. The old spark plugs are the very cheap Autolite. The previous owner probably tried to save money, but it end up cause me a lot of trouble. The gap of Autolite plugs are more like .042. I drove it a couple blocks I installed the NGK, and it felt better.

Or ngk brk8eix. Thats what im using and they are great.

I went with iridium's,and like the millage ,performance...

Stock on mine was .032, but my buddy's GLI was gapped from the factory at .029. I gapped my NGK iridiums at .028. I broke two plugs in the process...gapping iridiums with a normal gapping tool doesn't work!!

I changed over to the BKR7E model to see how they worked. I wasn't impressed because after that the RPMs on my tach wouldn't stay steady at idle.