Spark plug Champion or BRISK

39 dollars for parts? Hopefully they aren't champion plugs. Hell of a deal

Champion copper plugs are great! Why change if they are working perfectly? Copper is a better conductor than anything other than silver.

Stock is generally fine, however if your tracking or going through multiple heat cycles on your drives id recommend er12s from brisk. I run them and they havent skipped at beat. Intervals are shorter for changes.

Word to the wise, avoid using anything but the OEM recommended Champion Iridium plugs. Jeeps are pretty finicky when it comes to the sparkies.

I use brisk standard temperature. Work great

When I started the vehicle up, it woke up really aggressive, there was a strong gas smell and it stuttered badly when driving her, along with the check engine light flashing at me when I did the test drive.\n\nAfter taking out the coil pack, I found that there was a lot of crap inside the springs within the boots...looked like dielectric grease gummed up by the previous owner. After cleaning all those springs and making sure they were straight, I took the new Spark plugs out (Champion Copper) I rechecked the gap and they were all good, after putting everything back together the old girl started up quick as hell, no shaking or anything. I drove it for 15 minutes and I had no issues whatsoever.

I recently took my stage 2 43K mile b8.5 s4 apart and did the PCV, water pump, thermostat, new 2 step colder brisk spark plugs gapped to .25. I took the spark plugs out and noticed heavy carbon and the ground electrode was white, even on all plugs . (20 miles on plugs)

the guy said the spark plugs I used are the issues because they are champion brand and I needed to use NGK brand for my Acura

A few years back I bought a box set of eight Champion spark plugs that were made in Russia, and four spark plugs did that.

I've seen it multiple times in Champion in a small engine shop.