Spark plug Champion or BRISK

You get a better performance if you install a booster plug, DNA air filter and Brisk spark plugs. Great torque from 2000 rpm as a result.

I just got a new to me 2016 f150 with 120k. Did air filter, cabin filter, spark plugs (had a misfire) and boots and oil change. I used champion plugs but most reccomend OEM. Got a wix air filter and a fram oil filter. I used full synthetic 5W-20 Valvoline R&P oil. Use rock auto for parts if possible.

Stick with Champion plugs in the 4.0L inline 6. Anything else will have you chasing a “stumbling” idle.

I use champion on my 04. No issues. The more expensive ones that’s when the issues start

I use Champion in my 02. Never had any issues.

I just run oem plugs gapped to . 024 as recommended by eqt who I'm tuned by. No knock, I had brisks and Ruths before, my car didn't really like brisks and Ruths just made it misfire closer to the 5k change out.

Right before i changed the map I also swapped spark plugs (brisk er12s). Since it started the rough vibrating, I’ve inspected spark plugs and coil packs, changed the coil pack grounding to a ground kit, cleaned the MAP sensor, and even tried throwing some liquimoly valve clean in it.

Some of my best vehicle purchases have been trucks with "misfires" or "engine issues" and almost all of those have had goddamn champion plugs in them, or a champion distributor.

But let this be a lesson never use champion plugs again

Champion are the only plugs I’ve had the ceramic crack on, so no more Champion for me.