Spark plug Bosch or Autolite

i had a buddy purchase me a set of bosch platinum plugs. i installed the plugs this morning before going to work, removing the old plugs, i found the number 1 and number 2 are wet with fuel. after installing the platinum plugs, i cranked the engine. and it started! the idle was smooth. i took my vw to work today, and the engine pulled smoothly in all rpms!

Also I'm using the 3922's and love them. They went a long way in solving my timing pull probs w/ my ATP Stg3.

It was time to change the plugs so I went for one range colder (from Autolite 3923 to 3922). Before I installed these plugs, the power would drop off dramatically above 5500 in 3rd, 4th, and 5th. Now it is a much more progressive decline. The car actually maintains that pushed back in the seat feeling in the upper revs now.

The cheapo Autolite 3923 works very, very well. Works well with chipped and K04 cars also.

i run autolite 63 (gap to 24 thousandths) on my stage 4 for 500 miles with nitrous, they look perfect. 99 cents each. to each his own.

Plugs have been on for almost 4 days. No problems! Idle and runs smoother! HP feels the same!

I have autolites, they work well, but the car became jerky at part throttle when gapped at .024, runs better when opened wider for some reason.

Platinum +4s are the worst plugs you can use. They have a bad habit of losing tips into the cylinders. I don't think I need to explain the results of that.

i've got some bosch silvers...and this happened after about 12k miles and currently (3k miles) later i'm getting similar symptoms as before.

I have a strong opinion in not suggesting the Bosch or the Beru. There is a reason that BOSH is no longer the OE spark plug in VW, Audi, BMW, Mercedes Benz etc., etc... Stick to the NGK, especially in a VR6, NGK has been OE since the intro of the VR6 six months after Bosh failed to produce a plug that would run in these engine during start up. The Bosch had nothing but running problems.