Oil filter Mann or K&N

I used the Mann 950/4 on my 1.8t and sent my oil out for analysis to Blackstone labs. They reported that the filtration level for that filter was superior.

K&N filters are beefier, my old VRs filters used to come out looking like that. The only filter that would withstand the vr and keep its shape was the k & n

I always use Mann as well with no issues.

My g/f and I use Mann filters in both our GTIs and never had any issues.

I had this very same problem with my golf. Replaced both oil pressure sensors....nothing. Did an oil change....nothing. Replaced the instrument cluster....nothing. I was about to pull the pan off the motor to check for clogging on the screen or if the pump was faulty when I thought about an engine flush. I did just that, new 10w40 oil and mann filter and problem solved.

I ordered and received a bunch of maintenance items for the Van. But I plan to cover: Fuel lines (finally) Trans Filter/Flush Rear Diff Gasket and fluid Headlight Relay Kit Dual Washer nozzles Upper Ball Joints Lower Ball Joint Repack the front bearings SST Brake lines 4 corners 15W-50 Mobile 1Oil and new Mahl/Mann filter With the above it should be good for another year of backup use.

I had this issue in an old 2.0l cabrio with 165k miles on it. I eventually had to ensure I used a mann filter and 10w40 oil at all times. Never had a problem again. The better filter flows better and the heavier oil creates more pressure at the higher temps.

This is the reason I love Mercedes-Benz. The Mann filters use a fleece media rather than paper, and I have customers that routinely abuse their oil change intervals (20k miles) and they still held up. Paper filters don't hold up or filter very well much past 5 thousand miles.

I would rather run a Mann oil filter than an oem/VW filter. Same thing for the air filter.

anyone know if the mahle's are still made in a decent place. no more mann filter on my car, at least not the chinese ones.