Oil filter Fram or OEM Hyundai

I use the Fram Synthetic Endurance. It’s a super high quality filter blessed by all the cognescenti at bobistheoilguy.com.???? Definitely not the Fram orange cans from years ago.

I use Pennzoil Platinum and Fram Ultra filters.

I'd change the oil and filter with a Hyundai filter. Oil doesn't matter so much. These engines are very temperamental when it comes to the filters as they get higher in mileage.

When I first started to change my own oil I didn't have the proper wrench and just hand tightened my filter on. Drove like 10k on that and didn't have any issues.

Ok... so as a DIY mechanic, how tight am I SUPPOSED to tighten oil filters? The box says 1 turn after gasket contact, so that's what I do. It gets pretty tight by the end of a full turn, but I'm still able to do it with my hand (so long as it has one of those rubber grip coated bottoms, like the Fram Tough-Guard). I never have to use a wrench to get it to that point, but it takes about all my hand grip strength to do so. Taking them off is usually requiring a strap wrench, and sometimes it dents/crushes the casing.

I personally would spend a bit more money on a decent quality oil filter, stay away from Fram.

P.S. Use OEM filters. FRAM is garbage.

I don’t use FRAM filters; they don’t stand up to my pipe wrench tightening technique.

I agree with the 20W50 and good filter stay away from Fram, Bosch and Generic or Store Branded filters as they will give you the blinky oil light at idle controlled by the Canned Sensor on the right side of the head as you look at the engine.

Ends up the Fram 9584 does NOT have the correct size holes. Both are the same and smaller diameter. It will NOT fit over the base without ripping. However, the Fram 9584XL does.