Oil filter Bosch or OEM Volkswagen

I've been very surprised by how easy the Golf has been to work on so far, actually. Oil changes are super easy because the filter is a cartridge on the top of the engine, reservoirs are easy to reach and the battery doesn't require anything else to be removed to replace.

Any oil filter made for the car is fine, I bought Bosch P7078 just because it's available and a brand that I recognize.

Pennzoil Ultra Platinum + Bosch 3330 @ 7500 mile interval

I just completed my first oil change on this car and it was a breeze compared to my MK5 R32. We have a bone stock 2018 SE AWD and I didn't even need to get the car on jack stands. Oil Filter, VW P/N 06L115562B

I changed out the factory fill today at 2,347 miles. I could not find any VW 502 oil in 0w30 locally, so I used Valvoline MST 5w40 which is certified for VW 502, so no warranty concerns. I also used an OEM VW filter which was 15 bucks delivered also on line, but I hope to find those locally for a bit less in the future. I could see small shiny specs of debris in the creases of the old filter, which is why I (and many folks) don't like to run factory fill oil very long.

Nothing special about it- it's one of the easiest cars I've changed oil on. As others have said, just stick to a good quality OEM-spec filter and full synth 0w-20 oil. And it does help to replace the drain plug washer every time, or else it has a tendency to have a few small drips on the plastic splash guard by the time you next change the oil.Most modern filters will have the anti- blowback valve that the OEM filters have. I use Bosch premium oil filters and Pennzoil Platinum 0w-20 full synthetic.

my 17-yo, 168k Golf 2.0 gets 5/30 full synthetic and either WIX or Bosch filters.

So I changed the filter to an $11 Bosch filter, got the car good and warmed up, still low pressure. When I start it up and the oil is still thin, I've got about 50psi and as it warms up it just goes lower until it'S around 10psi at 2000rpm.

I put in Pennzoil Platinum 10w-30 and a Bosch oil filter from autozone. My problem now is that whenever the oil gets up to operating temperature my oil pressure light goes on and stays on under 2400 rpms, anything above that and I'm good.

One lesson I learned when buying oil filters for the VR6 is to NOT buy a Bosch filter. Why? They are about $10 more, and when you pull it out of that pretty little Bosch box and look at the filter, it's a Hengst.