Headlights Depo or OEM Audi

I like the euro stuff you have on it, how about some RS2 ellipsoid headlights next.

Mine used to get moisture inside on the passenger side. Only when I decided to completely separate the lenses from the housing to fix the adjusters did they seal properly. Just used a clear silicone around it.

It was everything I wanted and needed. Runs perfect and looks great. The only issue I have had with the car was a flickering headlight but Audi fixed it for me.

Pretty much these depo heads are plug and play just make sure all the wires sit perfect on the heads and you are good to go.! I only needed to run a wire for the fog lights.

I too bought the DEPO headlights but had mine done by a company here in the bay area called Umitzna who replaced the halo rings to Orion Rings which are LED based hence why its so bright. But the lights along with a Euro Light switch and I had to have my car VagCom to shut off DRL! Now when i turn on parking lights both halo rings come on and when i turn the headlights, both rings plus my HID's run.

My Depo headlights had the same damn problem. After posting my question a dozen times, I finally got the right answer: see onebdgti's first post in this thread: http://forums.vwvortex.com/zerothread?id=3122967 Had to get a very pointy set of tweezers and move a wire over in the connector.

My depo headlights were solid as hell. I ran a bead of silicone around the edges and didn't have a single issue. Light output was increased from stock as well.

Beam Pattern Output is IDENTICAL for both Low beam operation and High Beam Operation. There is NO difference. Zip. Zero, between the two.

stey away from depo... All the beam pattern I had seen from them SUCKS!!

Absolute garbage.. cheap, and you get what you pay for.