Engine radiator VALEO or Denso

My NA 1.4 OE failed (long time ago) because of aluminium tubing corrosion (brine). So replacement Valeo got paint treatment . So far 100k km without problems.

'07 V6 SR5 I replaced my leaking rad with a Denso four years ago and it's been absolutely rock solid. **NOTE** I'm not sure if this is still the case but some Denso rads have a couple little notches cut into the sides which are sometimes mistaken for damage as they are not neatly done (literally looks like someone just tapped it with a grinder). These notches are to allow the rad to expand a bit when the metal heats. They are necessary and part of the design even though they sure *look* like damage.

I have a denso radiator on my 03 4th gen. I changed my radiator for a denso one after it started leaking 5 years ago. It's been over 50k miles and it's going strong.

I put a Denso in my ‘04 V8 about five years ago, replacing the original that had around 200k on it. No problems so far.

Have had good experiences with Denso & Koyo.

Put a few more $ in and buy a slightly more expensive one. Preferably from a bigger brand - Denso, Koyo etc. guaranteed to be better quality in most cases and fit better.

Denso is the OE for most Honda rads. I've always used them and they're good.

Denso and Koyorad are good brands.

my valeo radiator didn't come with anything.. im just hoping it doesn't leak from that zone.

I did replace one with oem and fail in less than a month denso brand