Engine radiator Nissens or Denso

I got a Nissens radiator in mine after it had to be replaced last year, and it’s been serving me very very well

The Nissens are inexpensive and mine has been trouble free for ten years.

I put a Nissens in my 1992 325i cabrio and it fit perfectly. It’s been in there for seven years now and all is great. My car was an automatic when I bought the radiator. I later had the car swapped to manual and plugged off the transmission cooler ports on the radiator.

'07 V6 SR5 I replaced my leaking rad with a Denso four years ago and it's been absolutely rock solid. **NOTE** I'm not sure if this is still the case but some Denso rads have a couple little notches cut into the sides which are sometimes mistaken for damage as they are not neatly done (literally looks like someone just tapped it with a grinder). These notches are to allow the rad to expand a bit when the metal heats. They are necessary and part of the design even though they sure *look* like damage.

I have a denso radiator on my 03 4th gen. I changed my radiator for a denso one after it started leaking 5 years ago. It's been over 50k miles and it's going strong.

I put a Denso in my ‘04 V8 about five years ago, replacing the original that had around 200k on it. No problems so far.

Have had good experiences with Denso & Koyo.

Put a few more $ in and buy a slightly more expensive one. Preferably from a bigger brand - Denso, Koyo etc. guaranteed to be better quality in most cases and fit better.

Nissens lasted the longest for me. I was only getting about 2 years out of Behr's.

The MVP radiator and the Denso aftermarket are identical, both say Denso. The main difference between the OEM and the MVP/Denso is the OEM is 2 Core with a radiator thickness of 1.075 inches thick. The Denso is 1 Core with a radiator thickness of 0.663 inches thick. I measured the thickness using a digital caliper. Another difference is the transmission connection lines, the MVP/Denso looks like a cheaper aluminum, and the OEM is a heftier non aluminum metal. As a side note, after searching the internet and YouTube, some people have leaks at the radiator line after a couple of years with the Denso aftermarket ones. Next time I will be sticking with the OEM model, I just don’t have time to return the Denso and order another OEM one.