Engine oil OEM Audi or Motorcraft

Full synthetic Motorcraft for my Shelby, Roush, SHO, and Focus 1.0 ecoboost.

Ford performance oil filter for the Shelby. Motorcraft for the others.

Why? I had a Ford tech tell me any and all problems they'd ever seen with a Shelby engine involved one that used non-Motorcraft brand in engine or filter.

I run 10w30 motorcraft because my 300 doesn't dry start as bad with it

I tested it myself on my 3.0T, pumped everything out with the extractor, then jacked the car up and pulled the plug, catching evening that drained out in a measuring cup. It had less than 1/4 cup of oil left in the pan.

Did this every oil change on my sq5. Made it 180k miles before trading it in. Works very well. That was the easiest oil change I’ve ever done. Of the 15 minutes the job takes, about 4 of those minutes is actually doing something

Definitely prefer the extractor here! So easy/clean and gets all of the oil. At least in a Q8 and b9 A4/5 it got everything

I’ve done both and extractor takes out like 97% of oil. I still had about a half cup when I pulled the plug.

Só compro óleo original na concessionária e da Motorcraft conforme manual.

I do this on my Q5, I started using like half a quart of cheap new sacrificial oil to mix up the bottom of the pan and extract as much black oil as possible. I almost had an issue with the extractor tube getting stuck in the engine l, but I was able to get it out with a bit of force

I had the same issue on my 2019 A6 3.0 last year. Two times I had to pop into the dealership to have oil removed (no charge) and the issue was due to dilution and short trips.

2015 Audi A3, new to me a year ago. One quart every 400 miles. First car I've ever owned that consumed this much oil. It's a nightmare!