Engine oil Mobil or OEM BMW

If I could change the oil myself I would do it every 5k using the cheapest 507.00 spec oil I can find. But I can’t so I do it every 10k and use Mobil1 ESP.

As long as it states VW502 on the back, you should be fine.

I used to live in Chicago, and had cut over to Mobil1 0W40 based on feedback from a very respected resource who worked for Porsche. For context, his recommendation was grounded in enabling my engine to better handle the harsh Chicago winter temps.

To be frank, I'm not sure if it made a huge difference but then again I do not have a chemical or petroleum engineering degree.

I drove my VW to 200k miles without any issues.

You can also try changing your oil to M1 15w50 full synthetic that helped me with my cold start rattling issues and the engine seems to run smoother along with the vanos idle clacking noises going away.

Personally I use mobile 1 extended performance and change every 5k but I’m a bit of an oil critic

Tengo un Vento 2.0 TSI gen3 que cuando lo compré usaba Elaion F50 sintético 10w40 y lo consumía. Cambié a Mobil 1 FS 0w40 y no consume más...

I used to do Motorcraft 5w20 but I ended up switching to Mobil 1. It just performed better in the car and made the engine run smoother and quieter.

Our engines were originally designed for 5W30, so that's what I use. Namely Mobil 1 High Mileage.

I have a 22 Tiguan and did the first oil change myself around 5K miles. This is what I ended up using. I found it locally so that was a plus, Mobil 1™ ESP X2 0W-20 .

Been using Mobil 1 for over 20 years. Never had any issues.

I usend to run syn 15w50 in my tired old vr6 all year round, it helped with seeping issues, lifter noise and all if that. but the oil pressure would be through the roof during first start. so I'd set aside a few mins in the morning to let the car idle, relax, listen to a song and let it get some heat in it. on a normal day, the star up pressure would be .5 bar past the filter bypass (10 bar), warm idle was 2 and a bit, and everything above 3.5k was back to the bypass.