Engine oil LIQUI MOLY or Shell

Liqui Moly top tec 6200 0w20. Been running it for 90k miles of my 123k mile ownership of my car. No issues related to the oil.

I used to use Liqui Moly for my E92 M3 and it ran beautifully until 175k miles

Yes this is proper. If deleted don’t worry too much about the 507, i believe 505 will still work. Afaik the euro spec for Pennzoil is about the ash levels. I usually put in liquimoly 4200, but i was an awful amout low between changes when i checked last so I got 5 litres of this for 40 bucks canadian which was a steal. Topped it off and no problems.

I use Liqui Molly - which has the Volvo-required spec - purchased through FCP Euro. Hope that helps.

In my A4 2.0T I use 4qts of Liqui Moly 5w40 and 1qt of Lucas Heavy Duty Oil Treatment.

Liquimoly is only oil you should be running in your turbo vw

For best performance use liqui moly 5w30. I have also used it recently in my japanese alto with above 100K km.

I have a baleno woth 130k mileage and I have been using shell 10w 40 and the performance and fuel avg is great

I use rotella 15w-40, high zinc content but my engine also has 230k miles

Ughh. How did I miss that! I thought I was just saving $5 a liter for the same thing. I am so annoyed with myself. :banghead: I just pulled up the specs for both and indeed the Synthoil has a viscosity index of 171 vs 180 for the Leichtlauf. Also the NOACK for Synthoil is 12.9% vs 10.0% for Leichtlauf. From what I can tell the 12.9% NOACK of Synthoil is what doesn't allow it to have the VW 502 00 approval.