Engine oil LIQUI MOLY or OEM Honda

Liqui Moly Molygen 5w40. Not cheap but I swear by it, made the engine quieter too

I use Liquimoly Molygen (5W-40) and I’m very content.

I had oil burning issues even with 10W-40 in my high mileage 325.\nMy mechanic put in LiquiMoly 10W-60, which seems to be much better.

5w-30. I use LiquiMoly Molygen and my experience is good.

I buy Honda oil for my Honda because it came from the factory!

I use it on my 2016 S5 and it’s wonderful. It’s basically the same as Leichtlauf just with the friction modifier and UV capabilities if you need to spot an oil leak (only in the first 300 or so miles because then the oil gets too dirty to work with the UV). I’ve heard the friction modifier works well in older performance cars due to the increased wear of their engines. Yes it’s technically not approved but you won’t go wrong with it.

I use the Leichtlauf High Tech. Really helped my higher mileage SQ5 with chain rattle.

I personally use Liqui Moly. I've tried Castrol, Mobil 1, Amsoil, etc. and my BMW (E85 Z4M) runs noticeably more smooth with the LiquiMoly.

My GL550 has about 106k miles on it, just did an oil change with LiquiMoly 0w-40 and 2 bottles of LiquiMoly ceratec. Drove it kind of hard for a minute or so. Then noticed when I got back it had this noise.

I dont know about the newer 1.5t in the crv's, but im getting rid of mine because of the oil dilution issue. Sent out an oil sample and it came back with 8.2% dilution on oil that had 2k miles on it with 0 idle time. All the technical service bulletins have been done and \"nothing\" is wrong with the car.