Brake pads Zimmermann or Tesla

I remember somebody talking about swapping out the Brembo for Zimmermann brakes and he was much happier with those.

The pad material composite can be upgraded to extend mileage adding replacement parts like Bosch or Zimmermann (OEM suppliers) that are the same or better than stock.

With regenerative braking, you almost never need to replace brake pads.

I did them 6 months ago. I used import direct rotors from o Reilly. and some brake pads from NAPA I think I used Zimmerman brake pads. I have 0 problems with them and only need to do my rears in a couple of months according to the wear sensor.

Zimmerman blank rotors are a good street replacement. No need to pay for drilled/slotted rotors. Personally I went with ceramic brake pads. They don’t bite quite as hard as metallic, but they still bite well, don’t make as much brake dust, and they don’t seize to my rotors after they get wet

I love all things zimmermann brakes. Not the cheapest but some of the highest quality in my opinion.

The BIG difference is the brakes. In normal driving you're using one pedal driving, and this means two things. Firstly you're hardly ever using the actual brakes, almost all your braking in normal driving is through regen. Secondly because the regen braking is quite powerful, the actual physical brakes are relatively small. The brakes are great until they aren't, and they aren't great when you really need them.

I just had to do brakes and ball joints on my 2016 Model S (some rough roads, and calipers were seizing from winter corrosion, I live in the state of Maine, US). 100K miles, 160Kkm (160Mm?).

I switched to the supposedly equivalent Zimmerman blanks and textar pads and I didn’t like the performance so I switched back to the stock brakes.

Got a 60k MYLR, my pads and rotors seem fine but I keep getting this super loud squeal sound when I brake.