Brake pads TRW or Hawk Performance

I got my rotors turned and threw some hawks in it. HPS I think. No issues and they have good bite.

I would recommend the TRW ultra pads from the official ZF store on eBay. $50 total for front and rear. They’re a tier 1 oem supplier, and the ultra line is their premium aftermarket offering. Similar to akebono and the pro act line which isn’t available for the 4th gen. The solid Bosch rotors would be a good choice. Centric as well.

I upgraded my brakes. I went with TRW ultra ceramic pads, Zimmermann front rotors, brembo rear rotors, and it was definitely a big upgrade. The brakes no longer feel spongy, much better overall feel, and less brake dust.

I run non-oem pads on my t6 but that’s because I like more initial bite when I step on the brakes. I use Hawk street performance pads. They definitely make more dust and sometimes more noise than OE pads.

I thought I had a bleed/bore issue because my hydro wouldn't lock up under full force, turns out the stock style break pads were not sufficient to lock it up (even though stock pads work to lock rear wheels on foot brake). I switched over to Hawk HP+ pads and that did the trick for me.

Running Hawk DTC 30s on a Mustang (3800 lbs with me) both front and rear. I brake hard and the car is heavy. The pads don't glaze nor fade. Wear is OK.

I daily DTC-60s and they're surprisingly not that noisy.

My focus rs has been doing this. I’m on OEM rotors with hawk dtc 60 on front dtc30 on rear. It performs fine on the streets and around town. When I take it to the track it starts to judder, noticeable 5 mins in but at the end of 20 min session it gets a lot worse.

Motul RBF600 is a popular fluid choice.

pad choices are far and wide. i run hawk HP+ which isnt really the best track pad but its gotten me by. the paint on the back of the pads melted off before i ever felt fade so i guess they worked well but i suspect im *at* the limit of their performance.

TRW a kezdetektől 4/1 sípol, sosem lehet tudni.