Brake pads Raybestos or OEM Hyundai

I would go with the Raybestos Element 3 kit sold here. $180 total roughly front and back. 2 seperate kits, one for front, one for back. You will find this under the fully coated section here as they have different grades of pads. For the price and how long these last, you cannot beat it. And better than the top quality parts local parts stores carry, in fact Napa sells these rebranded as their premium top of the line brakes and rotors. For the price, and the quality, is by far your best option. There are better pads that will last a little longer, but are much more pricey. With the miles you drive, these will last 5-10 years. I use these on all vehicles in the rust belt, as these are rust coated.

I bought Raybestos Element 3 Hybrid pads and couldn't be happier. They squeal a tiny bit when very cold but I trust these brakes to get me down a mountain.

I have a 21 Kona this was my 3rd winter with it here in NL, no rust proofing and they love using 1000% salt on our roads, no issue on my whatsoever. I have it checked every time we get our wheels changed sometimes they have to greese the pins on the breaks but no corrosion or anything.

If you're keeping the vehicle (make sure you're keeping it), then I second getting the raybestos from Rockauto. Make sure you get the raybestos element 3 fully coated rotor and pad sets.

Even if your friend's dad does it free, maybe drop him $100 or $200 for the labor.

So $200 total. And less dust than OEM with decent stopping power. I went with this combo cause it's balanced stopping power and rotor longevity.

The OEM rotors wear very quickly. The OEM pads are Akebono semi organic which are actually pretty good. However the OEM pads create a ton of brake dust which makes the wheels look terrible. When I replaced mine about a year ago I went the aftermarket route and used Raybestos rotors and pads.

Elantra N and Kona N OEM brake pads fit the Veloster N. I paid $115 shipped. This is the part #58101-IBA00

The best overall for my use are Raybestos “Truck and Medium Duty”.

Replaced all four disc brake pads (not rotors) at 109,000 kilometres. Recent highway travel in very harsh winter conditions on new blizzaks over 7 days.

I replaced the pads and rotors on my Jetta this past spring. I put on Raybestos Element3 pads and coated rotors, and I've put maybe 6k-ish miles on them since then. Everything was fine for a while, but lately a squeal started to slowly develop until now it's every time I use the brakes. It sounds exactly the wear indicator noise I'm used to hearing when pads are low.

Had to take out a loan fr 3k for brake pads and labour to put them on. From a huge well known dealership. Local mechanic did the same thing for around 300 dollars a year later when they failed.