Brake pads R1 Concepts or Hawk Performance

I have R1 concepts from Amazon, perfect for the car and stopping power.

I thought I had a bleed/bore issue because my hydro wouldn't lock up under full force, turns out the stock style break pads were not sufficient to lock it up (even though stock pads work to lock rear wheels on foot brake). I switched over to Hawk HP+ pads and that did the trick for me.

Running Hawk DTC 30s on a Mustang (3800 lbs with me) both front and rear. I brake hard and the car is heavy. The pads don't glaze nor fade. Wear is OK.

I daily DTC-60s and they're surprisingly not that noisy.

I am stock turbo FBO (engine wise) FiST, switched from Powerstop Trac Day Spec to Hawk DTC-60 with good results.

I havent had an issue with them in 2 years.

I’m a big fan of how my brakes feel after upgrading to the Hawk HPS 5.0 pads, Bosch solid rotors (drilled/slotted do more harm than good), and some Goodrich Stainless Braided Brake lines.

I run Hawk HPS 5.0 they are good but we're spongy even after the recommended break in. I ended up doing a run and intentionally abusing the brakes to get them good and hot to the point that they faded. After that, they were great.

I haven’t heard of fake brake pads but be careful. The main reason I’m commenting is HP+ pads might be good for autox but if you have experience on track, I’d avoid. Granted, my experience using them was on a 2015 WRX but you can overheat the pads pretty quickly on a heavy braking circuit.

After two years or so I get horrible squealing when I stop in reverse. Rusting is pretty bad too.