Brake pads POWER STOP or WAGNER

Powerstop easily shortened my braking distance by 30%. 100% recommend.

I've been using Powerstop brakes for years, and haven't had any mechanical problems. My only issue (and this is a personal one) is that the thick rubber backing makes the pedal feel a bit spongy.

Happy to report that the Powerstop Z23 front pads don\u2019t shift at all. Very solid and tight in there!

I just did brakes with: Powerstop Evolution Sport, Drilled/Slotted Discs, Carbon-Fiber Ceramic Pad Part Kit#: P15K5305, Mach V Techna-Fit SS Lines, Motul DOT 4 fluid. All for under $600 and I’ve been very happy with this setup. I don’t track but drive spirited and they’ve performed flawlessly, and no more brake dust.

I put the Geomet coated Powerstop rotor and ceramic pad front and rear kits from RockAuto on my ‘14 XT. They work well and my speed demon wife liked them better than the originals.

I went with the powerstop z26, i think, carbon ceramic pads and drilled and slotted rotors all around for about 550 dollars from autozone. Fit and finish were perfect and did all four corners in my driveway in a couple of hours. The brake in procedure is very simple and they work very well. Zero brake vibrations and feels so much better.

I did the entire powerstop front and rear kit, has worked great, 0 issues in roughly 20k miles.

i have had powerstop on my car for the last year and a bit, no complaints, brakes are still good for dailying but with more bite when you jam down on the pedal

Ok, so, at a particular location I worked at we used Wagner Thermoquiets. Decent pads, but this particular location seemed to get the worst quality pads ever. The only way we could keep the customer from coming back was to make sure everything was well lubricated, and we also used some sort of orange goop to stick the brake pads to the calipers. Then we took it out for a break-in session, I believe it was 5 stops from 30mph, gently using the brakes, then another 5 with moderate brake pressure. And if the customer was too hard on the brakes it might still come back.

I have their brake pads and I dislike them, the brake dust that comes off is almost 10x the amount of the oem ones