Brake pads POWER STOP or OEM Volkswagen

I put Powerstop Z23 pads on my 2022 3 a few months back. No issues at all.

Power stop z23 pads been working well for me, seems like much less brake dust that oem

I put Powerstop Z23s on the front of my '20 and I'm very happy with them. A little noisy on cold mornings for the first couple applications but that goes away when they warm up a tiny bit.

Project Mu Club racers front and rear will cost the same as just the XP10 fronts. Then use powerstop Z16 for the street, super low dust. Same rotors for both.

I run power stop on my IS250 for the past 5 years. They somehow still look brand new over the past 50k miles so they really do last.

I put Powerstops (drilled/slotted) on my Sequoia and couldn’t be happier. And I’ve done a LOT brakes, typically using OEM, but research showed I could do better on the heavy Sequoia especially. ’ll be putting them on my GX and 4Runner next time they need brakes!

Happy to report the upgrade seems to be worth the effort. The brakes seemed very smooth and responded well on all the downhill coming through the mountains. No noticeable noise, overheating or warping of any kind. Just smooth consistent brake and pedal feel for the entire trip out and back.

I got my PowerStop Z26 Street Warrior pads through them about 2 years ago and they're working fine.

powerstop z26 (just know these are noisy so lubricant them right, I recommend synthetic brake pad lubricant).

Bought a set of Powerstop pads and rotors for my Avalon. Every single pad had paint on the edge that prevent the pad from sliding smoothly. Ended up sanding the edges of all 8 pads before I could install them. The rotors warped in 20k miles on the front, and 1 of the pads cracked...