Brake pads POWER STOP or Bosch

I've put either the z23 evolution or the z26 street warrior on many vehicles. Awesome improvement in stopping power across the board.

Powerstop on my Durango RT. Never an issue and been great for years.

I've ended up with Power Stop on 3 Fords (Fusion, Escape, and Focus) and an Infiniti (Q50 3.0t AWD) and have been happy. Plus it's easy to just buy one kit and everything shows up together. I tend not to use their grease (I have a big tube of sil-glyde in the toolbox) and their retention springs for the rear calipers on the Escape didn't fit (this is not uncommon with other brands I've had on it as well). I've also had very good results with AKebono and used to swear by Wagner ThermoQuiet pads until I had trouble getting them a couple years ago and got the Power Stop parts.

Have the powerstop z36 on my gen 1. Next to non brake dust compared to the oem pads/rotors

Power Stop pads and rotors on my Ram 1500 are the best setup I have ever had. Nearly zero dust and consistent braking.

I used PowerStop (cross drilled) when I did my brakes two years ago. They seem pretty good.

I have Power Stop brakes on both my Miata (Z26) and my 3 (Z17). Been on for about 45k km on the 3 and 20k km on the Miata. Absolutely fantastic brakes... The Miata gets driven hard and the brakes have been flawless and powerful. The 3 is a daily driver and the brakes are better than OEM, but not to the point where they'd change the character of the car.

I put Powerstop geomet brakes on my '15 over the winter and they have been solid. I've been pretty happy. They also don't look rusty at all so far.

Had TRW pads on the rear and they're dusty af! Replaced them a wk ago with POWER STOP CRK7176 from RockAuto and all is Gucci.

I ordered Bosch brake pads after installing them. I noticed a knocking sound and if you look in the pic there’s a gap at the top and bottom of the ears on the pad. I threw my old pads away so I couldn’t even compare them. Only when driving really slow then braking or in reverse. Didn’t do it every time but the noise is driving me crazy. I also installed new rotors front and back and it’s only the front driver side making that noise.