Brake pads OEM Toyota or Hawk Performance

Toyota hybrids have no starter, no belts, no alternator to wear out and the brake pads and disks last around 100,000 miles due to little use

hawk hps 5.0 pads all around

I use Hawk HPS 5.0 pads. Definitely an improvement over stock and I haven’t had any issues with dust.

Depending on the track the factory pads may be adequate for your first day, but a more aggressive and higher temp pad would be my recommendation because nothing will up the "pucker factor" like your brake pedal going to the floor. A pad like the Hawk HPS 5.0 is what I'd consider to be minimally acceptable for street tires on an average track. I'm a big fan of GLOC pads and I can confirm their R8 compound on all 4 corners works great on the GTI/R/A3/S3 for street tires.

Hawk makes the DTC series for the 718 base. Can't go wrong with the DTC-30 for a pad that you can drive back and forth to the track and will perform very well on track. The dust is nasty and corrosive though, so I'd recommend cleaning the wheels and changing the pads out for street duty.

I had Hawk HP+. They were extremely noisy and dusty, very strong bite though. I now have the standard Hawk HP pads, no noise and far less dust. Not as much initial bite, but still really great performance. I wouldn’t swap back to the HP+ after having both.

Have used these for a while now and will be getting them again to pair up with some DBA t3 rotors

Hawk (no, not that Hawk) pads work well, bedding in process is straightforward, and they only squeaked for a first few hundred miles or so when coming to a dead stop.

I only daily as well but I did a slight upgrade due to some spirited runs each year. I did Hawk ceramics and DBA T2 rotors. Theyre enjoyably different but likely overkill.

You will find the HP+ pads are possibly the worst pads ever. You get all the downsides of track pads and street pads. The dust from Hawks will also eat your wheels.