Brake pads OEM Nissan or Hawk Performance

The racing shop that does the work on my track car picked out Hawk HPS 5.0 pads for me for this same purpose. They worked great on the track and don't have much more noise than a factory pad.

I'm only in HPDE2, though, so my track evaluation may not mean much. They were definitely an improvement over the stock pads I used in the previous track outing.

Hawk HPS 5.0 pads, Raybestos AT. I'm on my 4th? set of front pads+rotors after 125k miles. Rears are still the stock.

Blank rotors and Hawk HPS 5.0 pads. I’ve been running them for almost a decade, and I’m always surprised at how long they last and how little dust they make for how aggressive as they are.

Brake inspection during the tire rotation, replace as needed (haven't needed to yet thanks to regenerative braking - I'm at 62k and I think I have OEM brakes).

I haven't investigated ceramic pads for the Golf R but based on the Hawk Ceramic Compound Performance Pads I have on my A4, which has huge RS4 front calipers and B7 S4 rears, I'd try them as they are quiet, generate negligible dust and are easy on the rotors.

Hawk HPS brake pads

I like my Hawk HP Street 5.0 pads and both were purchased from TireRack and helped increase my stopping power.

You could look at Hawk Enduro pads and see if they last longer but you'll probably net less braking power so you'll need to recalibrate your markers a bit. 3100lbs and 300hp - dtc60s last me 8-11 track days (though one of my local tracks is easy on brakes) based on my experience last year running in advanced groups - including multiple open sessions with 30-50m long runs.

Nissan brakes are on this squeak train as well. We barely have a remedy for it, other than ‘regreasing’ them. I tell my customers that the pads are designed with materials for better braking and less dust, at the cost of noisy brakes when cold.

The time I drove the Nurburgring I was using Hawk 5.0 pads and I lost my brakes to brake fade 2/3 down the track.