Brake pads JURID or Hawk Performance

I run non-oem pads on my t6 but that’s because I like more initial bite when I step on the brakes. I use Hawk street performance pads. They definitely make more dust and sometimes more noise than OE pads.

I thought I had a bleed/bore issue because my hydro wouldn't lock up under full force, turns out the stock style break pads were not sufficient to lock it up (even though stock pads work to lock rear wheels on foot brake). I switched over to Hawk HP+ pads and that did the trick for me.

Running Hawk DTC 30s on a Mustang (3800 lbs with me) both front and rear. I brake hard and the car is heavy. The pads don't glaze nor fade. Wear is OK.

I daily DTC-60s and they're surprisingly not that noisy.

I am stock turbo FBO (engine wise) FiST, switched from Powerstop Trac Day Spec to Hawk DTC-60 with good results.

I’m a big fan of how my brakes feel after upgrading to the Hawk HPS 5.0 pads, Bosch solid rotors (drilled/slotted do more harm than good), and some Goodrich Stainless Braided Brake lines.

Front - OEM rotors, check Lexus parts too, same same, with Hawk Heavy Duty pads. Rear - Centric or OEM rotors and oem pads. Fluid - Pentosin DOT 4 Low Viscosity brake fluid. Full fluid change every brake job.

I haven’t heard of fake brake pads but be careful. The main reason I’m commenting is HP+ pads might be good for autox but if you have experience on track, I’d avoid. Granted, my experience using them was on a 2015 WRX but you can overheat the pads pretty quickly on a heavy braking circuit.

They feel amazing and the braking power is noticeably increased but they create an incredible amount of corrosive dust and make a really terrible high pitched noise on occasion under light braking.

I did two track days on these new hawk hp+ brake pads and Zimmerman rotors. After the first track day, something weird started happening: I started hearing the squealing that I hear while breaking even when I’m not breaking. It’s not constant, but it’s coming from all four wheels and is mostly heard at low speeds, especially after starting to drive after coming to a complete stop. These are two track days in. Should I be worried?