Brake pads Ferodo or OEM Hyundai

I think they work just fine. They squealed a bit even after running them in, it stopped however after the first track day where i properly cooked the brakes.

If you want a bit more performance without loosing cold braking, use ferodo ds performance, they're amazing price-quality wise.

Ferodo DS2500 paired with Zimmerman blank rotors and Motul RBF600 is what I use. The tracks I go to are more technical and not fast so it's great for my use case. I imagine if I went to a track where speeds are above 150Km/H and have long, fast corners, I would need better pads. I'm considered intermediate to advanced and last ran a 1:47 at CTMP DDT with worn Vitour Tempesta Enzo tires. I think I can run low 40s this year. I would not track with stock pads. I overheated my pads and brake fade hit hard. The pads melted and I went off the track and almost over the hill at TMP (Cayuga).

I used DS2500 for my first 2 track days but outgrew them rather quickly on a 2800 lb car. Last time I swapped to DS1.11 and felt much more confident braking deeper into corners with zero fade at my intermediate level. Now I just use DS2500 for the street and canyons.

My Ioniq 6 was shaking and vibrating a lot while driving around today, so I turned on the disc brake cleaning function and slowed down from 65 to 45 half a dozen times to heat up the brakes. That melted the ice around the brakes and in the wheels, and the car went back to driving normally.

if you want raw stopping power then Ferodo DS2500's are great.

I was a huge fan of Ferodo DS2500s on Centric rotors. They performed insanely well for street duty and were decent enough for track days.

Recently completed my HPDE and by the end of the day my stock pads were completely gone. Got my front rotors and all my pads replaced soon after that. I went for the Ferodo DS2500 pads. While bedding my pads, I noticed the brake feeling/bite is quite nice when braking at around 50-60% pressure, but once I tried emulating track style braking (i.e hitting brake pedal very hard) I noticed that my brake pedal was vibrating/rattling and also felt some sort of scraping was going on. This would happen even when hitting brakes hard from low speeds of ~30 mph. It's felt entirely on the front brakes. ABS did not engage, so I don't think the vibrations are from that. The obvious visible difference I see is the use of high temp brake lube from the shop.

Ferodo Ds2500 as brake pads or Ebc Yellostuff (a tad cheaper). Avoid drilled or grooved rotors because kinda useless. Just a good oem equivalent like Brembo (if in you market have CTF go for it)

jai des ds2500 et mes freins sifflent tres fort cest chiant