Brake pads Ferodo or OEM Honda

Ferodo Brake pads

If you have 312 mm front rotors I'd suggest to upgrade to FER-FCP4433G

DS3.12 pads https://www.brakes-shop.com/fer-fcp4433g-ferodo-ds3-12-brake-pads-front.html and Motul 600 / 660 brake fluid (or Castrol React SRF).

With this setup you will be limited by your tyres and suspension.

Don't buy DBA rotors and pads or EBC pads. You will destroy them (like crack in pieces).

Don't run with OEM fluid or pads \u2014 you will definitely lose stopping power relatively early on.

Cons: limited by tyres, suspension
Part number: FER-FCP4433G
Comment
Is this review helpful?
source
Ferodo Brake pads

Back in May I swapped OEM pads for Ferodo DS2500 for my first track day in my GR86. Otherwise the car is bone stock. I noticed some slight pulsing of the steering wheel but only during hard braking (100 to 30mph). No brake fade that I noticed.

Pros: no brake fade
Cons: slight pulsing of steering wheel
Vehicle: Toyota
Mileage: 3000 km
Comment
Is this review helpful?
source
OEM Honda Brake pads

I've done about 4000 miles on it this year and it's really grown on me. It's comfortable enough, the brakes are really good, the abs isn't overly intrusive. The handling is decent, the geometry is definitely more about stability than agility.

Pros: comfortable, good brakes
Cons: stability over agility
Vehicle: Honda
Mileage: 6437 km
Comment
Is this review helpful?
source
OEM Honda Brake pads

For the record, my wife has a 2014 Honda Odyssey with 175,000km on it and she's had zero problems aside from normal stuff like changing her brakes and whatnot. That thing is a tank.

Pros: zero problems
Vehicle: Honda Odyssey
Mileage: 175000 km
Comment
Is this review helpful?
source
Ferodo Brake pads
strat61caster
  • Braking:
  • Noise:
  • Dust:
Rating 3.5

I daily and autox ferodo ds2500, pretty happy with them, more dust and noise than an oem pad but can withstand light track work. Doesn’t sound like an awful bus/train but the occasional squeak happens.

Pros: withstand light track work, pretty happy
Cons: more dust, more noise, occasional squeak
Part number: DS2500
Comment
Is this review helpful?
source
Ferodo Brake pads
tannit
  • Braking:
Rating 3.0

The 3.12s have a LOT of bite and can make modulation tough on certain cars. On my E46 M3, I run DS UNO or DS1.11s. That's with the AP race kit front & rear. Didn't like the 3.12s for that application.

Pros: a lot of bite
Cons: modulation tough
Vehicle: BMW
Comment
Is this review helpful?
source
Ferodo Brake pads

I purchased Ferodo DS2500 pads for autocross with the Brembos when my stock pads were shot. Lubed them up using CRC brake grease and even bought separate Girodisco backing plates to help with noise. It was absolutely terrible. Loud squealing all the time from 15mph to zero. Down hills, in traffic, or coming to a stop.

Cons: loud squealing, terrible noise
Part number: DS2500
Comment
Is this review helpful?
source
1 2 3 4 5 6 7 8 9 ... 21

Write your review

Help others - share your experience with this part.

Other comparisons
Loading...