Brake pads Ferodo or DIXCEL

Personally, I’m a fan of Ferodo, but I typically need to get them from the UK.

The AP Racing kit was installed with a set of Ferodo DS2500s in the front and stock OEM pads installed fresh in the rear.

I did tons of research and settled on Ferodo DS3.12 (FCP4425G) in front and DS1.11 (FCP4697W) rear with Castrol SRF fluid. Stock R calipers and rotors have held up as well as any aftermarkets I read about for MUCH less $. Zero issues, and cheap.

I've had good results with Ferodo DS2500 pads. More torque than stock, dusting about the same.

Dixcel ES pads are a “fast street” pad with low noise and dust that out perform oem pads and can be used for light track application also with effective heat range of 0-600 degrees Celsius. I think they’re the best “bang for buck” pad you can get.

I love the Ferodo DS 1.11 that I use on my M4. They're noisy and the dust is epic but they're totally fine to drive to and from the track. I've used them at a few track days at California Speedway, they're wearing really well, and I've never had even the slightest fade.

For \~$250, the Ferodo DS2500's are a great pad for dual street/spirited and light/medium track use.With any semi-metallic pad, you're going to have dust. You can't really substantially reduce dusting without going to something like ceramic pads, which then frictional force is compromised.

The heat resistance is much better than the stock pads, so it'd take a lot more to make these pads fade. They are more durable as well at least according to my experience. The only issues are that when it's cold the pads do get a little noisy and there's the increased brake dust, but I think these are non major issues and worthy of the trade off for much better and reliable braking performance.

had a track day over the weekend and saw that a hard, black substance that seems a little rubbery had formed on the brakes. The brake pads are Dixcel ES brake pads. I had not bedded them in and instead street drove with it for a couple months as the website suggested. Brake grease was placed on the pad surface contacting caliper. The track has lots of left turns and I braked from 170+ kmh to 80kmh on the first corner. I'm pretty new so i may have braked deep as I was turning. The substance formed heavily on right front wheel, less on left front and none on rear. Brakes were smoking lightly when i came into the pits. Braking feel didn't change throughout the day as I continued lapping. Car still tracked straight. I tried not to brake too hard and didn't observe any other substance buildup.

I swapped out the rear pads on my 2017 Mk7 Golf R following the instructions for doing so with OBD Eleven Pro to a "t" and still wound up with a plethora of error codes. I installed new (Ferrodo) pads