Brake pads Ferodo or Centric

I was a huge fan of Ferodo DS2500s on Centric rotors. They performed insanely well for street duty and were decent enough for track days.

Ferodo DS2500 is about the best pad you can get.

I've got OE spec ferodo on my 208 GTi no complaints from me, got brembo on my Saab 9-5 aero again all good I would avoid the cheaper end of the market

Ferodo DS2500 were good in my daily/tracked GTI and track NB Miata, until I got GLOC track pads on the latter. Which are awesome. BUT the DS2500 held up to the track really well, I'd definitely say for a daily that gets tracked they're about as good as you might get. Grease the contact points on the pad with copper or other compatible grease and i think they don't make much noise at all.

I'm running Ferodo DS 1.11. and they're fine on the streets even during winters when it gets even as cold as -25C

If my customers choose aftermarket, I always get

380mm centric high carbon rotors

Centric posi-quiet ceramic brakes.

The centric rotors are the absolute best bang for your buck.

I find paid results in comebacks, and oddly enough I get a lot of comebacks when I use brembo brake pads and rotors (they are 100% a different formulation than the land rover brembo OEM spec)

I got their vented rear and front rotors (Girodiscs) with stock calipers and Ferrodo DS2500 pads all around. For a stock powered car they work great at VIR. I have done 2 sessions there now and braking is pretty decent. On the street this combo will never fade period. The rears overheat which overload the fronts and cause issues. Rears overheating also causes the wheel bearings to go out so getting vented rears is just smart.

Recently completed my HPDE and by the end of the day my stock pads were completely gone. Got my front rotors and all my pads replaced soon after that. I went for the Ferodo DS2500 pads. While bedding my pads, I noticed the brake feeling/bite is quite nice when braking at around 50-60% pressure, but once I tried emulating track style braking (i.e hitting brake pedal very hard) I noticed that my brake pedal was vibrating/rattling and also felt some sort of scraping was going on. This would happen even when hitting brakes hard from low speeds of ~30 mph. It's felt entirely on the front brakes. ABS did not engage, so I don't think the vibrations are from that. The obvious visible difference I see is the use of high temp brake lube from the shop.

If you're looking for a solid set at a budget price, I've always had solid results from Centric and Power Stop brands on Rockauto. They're not high end by any means but they're cheaper than going OEM and they've always lasted at least 40,000+ miles. Also, if you go to Rockauto, do not be tempted by their economy category. The offerings in that section are very inexpensive but you absolutely get what you pay for. I went that route once out curiosity and the pads and rotors from the economy section were awful. Squealed and squeaked from day one and wore down insanely fast. Tried sound dampening sprays and re greasing. Never took the noise away.

My rear pads cracked after 3 months, 4k km of use.