Brake pads EBC or Zimmermann

Here's what I did at 30k miles as the originals had faded badly StopTech slotted rotor with EBC redstuff pad - I'm certain you'll get a thousand recommendations on better stuff. Love, love, love these brakes. Very little dust.

I went from OEM to ebc yellow stuff to combat brake fade on the track. I feel a bite difference on the road for sure. If you don’t mind a bit of squeak, the ebc brakes are good.

I also upgraded brakes to Optimal brand e-cote rotors and EBC Red street/performance pads. A nice improvement in brake feel and the new rotors look better, but hardly necessary.

Calipers cleaned up with new EBC pads, as well as a complete fluid flush.

Just had Stoptech slotted front rotors, EBC ceramic brake pads and Motul DOT 5.1 brake fluid installed on my 2016 GSW....BIG improvement at reasonable price....

I just had Stoptech slotted rotors & EBC ceramic brake pads installed in front along with Motul 5.1 brake fluid -- great improvement in stopping power at a reasonable cost

Mine were equally grooved, if not more so. The stock pads have a high metal content and this eats away at the rotors. I recently changed my front rotors and pads for Stoptech Slotted + EBC red ceramic pads. Rotors are noticeably higher quality, and the pads are pretty good as well, though they dust considerably more than my stock ones did.

EBC pads come with special brake-in layer to deglaze rotors. And this is what they recommend (came with pads): I have them on my Tig. Excellent low dust, high performance pads.

I switched to EBC redstuff ceramic from my OEM pads on my MX-5. They are marketed as slightly higher performance than OEM with much improved wear and dust levels. In my experience they are maybe slightly more grabby initially, otherwise they perform similarly to OEM, but their claims about dust levels were not true at all in my case, they dusted FAR more than OEM. I get noticeable dust after a few days compared to maybe a few weeks before.

We had really bad luck with EBC yellows, had a pad seperate from the backing plate, then the next set warped after one track day. Never again.