Brake pads EBC or R1 Concepts

I've ran 2 seasons in a 3300lb Golf R with SR21 fronts and SR11 rears and they've been insane, in my humble opinion. One front set lasted 10+ events, with street miles in-between, and the rears are still the same originals I slapped in 2 years ago. Zero fade, crazy long life, and no chunking/glazing/side effects I can think of. Ran DTCs in the past, and I'd snag these in a heartbeat over any other pad I've used or seen firsthand. The only complaints I have is they bite HARD. Since these work from ambient they will throw you through the dash in the paddock if you aren't careful ???? The plus to that is no real warm-up laps needed. Sintered also stands up to heat extremely well since there is no resin to break-down, which means I can run titanium shims without it baking the pads. Outside that, they throw off some weird non-ferrous silvery dust. Nothing like most race pads where it'll cake everything in the wheel well. It's almost like a bit of gravel dust after every event. Then the price, depending on your pad shape. They're a little under $100 more than most pads in my case, but the life of them more than makes up for it.

I used EBC blue stuff on my BRZ with factory brembos, and replaced the pads using FCP euro lifetime warranty. EBC blues would hold up for multiple track days with stock power on 200TW tires, and I didn’t experience fade at my skill level, usually intermediate at HDPE days.

I have a dedicated track car but I use it to have fun. Therefore, I'm going to test out EBC Bluestuff NDX pads to start this season. I've also used PowerStop Track Day pads and they felt great.

I did dot 4 fluid, braided lines, new solid rotors, and EBC yellows and couldn’t be happier. Brake fade was VERY much improved.

I've used EBC Yellowstuff and Intima race/track pads for the i30N from Australia...both were fine, but I liked the factory Hyundai pads better.

I got the bluestuff pads for the front of my car and couldn’t find the bluestuff rears in stock anywhere so got another brand for there. From what I heard it’s a solid brand

I just switched to R1 concepts Geomet pads, and drilled and slotted rotors. They're just as good as OEM from what I can tell.

Those look to be EBC "greenstuff" brake pads. "For spirited street use on lighter sports sedans and hot hatches, Greenstuff 2000 series is a perfect choice." They are made more for performance than driveability, they aee not really meant for your average daily driver. They are not bad pads, but they are intended more for the weekend racer. The pads will be noisy and harder on the rotors than regular pads. EBC also offers a red pad that is even more aggressive and intended strictly for track use.

I'm going to shit on EBC HH. They're popular, easy to get, and somewhat better than OEM. But they suck ass. Every time I need more brake power they fade. Every time I want the brakes to bite they just shrug and I feel like I need to clamp down. Progressive riding? Sure. Emergency braking? Hell naw. Need to cut speed for sharp corners? Good luck. So I've switched to Vesrah and never looked back.

I just had the worst experience with EBC redstuff pads. brand new pads, and the first time i put pressure on them - they fail - badly! overheating within 5 minutes of spirited driving in the mountains.