Fresh front brakes, Zimmerman blanks with EBC Bluestuff, hopefully these do better than the yellows. Pedal feel with the Endless fluid was consistent as well.
I ran EBC Redstuff on my 09 R56 and they were great. Very nice sporty braking but it wasn't overly aggressive and the noise and dust was pretty low. Made for a great daily driver with better than stock braking.
I run yellow stuffs on my F55 S. It’s a daily but I also canyon carve. Compared to OEM, I’m extremely happy with the performance and brake feel.
What bloody manufacturer is this? For my Volvo XC60 it’s around £330 for front discs and pads main dealer
If you are looking for high performance, I can vouch for EBC Yellowstuff and Bluestuff NDX. Yellowstuff is a good high performance street pad. no noise even in cold including down to -29 deg C. There is some squeal if the car has sat in the rain the first time you touch the brake pedal but its quiet after. the pads have really strong bite and sustain heat fairly well but wear down rather quickly if you are doing track days. mine lasted 20,000 kms including 6 track days and 4 autoX events. under road driving conditions only, they last much longer. If you want something to last longer and be better suited for track but still be streetable, Bluestuff NDX will do that. they have similar bite to Yellowstuff but sustain higher temperatures and last longer.
I like EBC greenstuff. No louder than stock, good cold bite, and a little better heat resistance. Good for autocross and street, but they won't hold up on the track. And they don't produce a huge amount of dust, though it is more than oem.
EBC Reds. I would check the rotors though, because if your pads are thin there’s a very good chance the rotors will need replacing too. In which case you may as well go Zimmerman rotors and EBC reds.
I upgraded to the yellows from stock pads and they held up fine but they were getting hot and I could smell them in my first session.
I’ve driven roughly 150 miles and I’ve done EBC’s suggested bed in process. But they’re still squealing when I’m coasting from 0-40mph. The squealing sounds like the wear indicator rubbing on the rotor, but they’re brand new and nowhere close to the rotor. Do they take longer to bed in? The squealing is really high pitched and annoying
I tried them on the track years ago. Junk!
Write your review
Help others - share your experience with this part.
