Brake pads EBC or ENDLESS

For Autox - why not Yellowstuff. They are a great street/autoX pad in my experience. Reds are horrible to me/not worth buying. Also Ferodo DS2500 is a good all-arounder.

I'm running Endless MX87s on my WRX. They work really well for autocross and are streetable. Little noisy when cold, but never had any issues driving to and from events, even in traffic

Red stuff I find amazing at auto Crossing + daily driving. Low dust, no noise a great street performance pad. Absolutely not meant for track use.

EBC Ultimax produces much less dust than YellowStuff. If you like cleaning wheels constantly...And Ultimax performs very, very well.I used to use YellowStuff for autocross events, on three different cars (Mazda 2, Focus S and NC Miata).

I have some lighter rear rotors that are OEM sized saved 5lbs along with stainless brake lines and the brake master cylinder brace that keeps it from flexing on firewall...all from ECS to be paired with EBC reds up front and blues in the rear. IMO it was the quickest way to liven up braking capability without getting into big brake kits.

Listen, try to change your brake pads and just to be sure, fill a new brake fluid and the problem likely will go away. But try pads first. I recommend using EBC DOUBLE H sintered pads

Endless mx72, 2 days in a Porsche 718CS

I have run the EBC RP-1s and currently am on the RP-X. The 1s were fine/no issues I just didnt like the lower Mu (less bite). These are a 1400+ deg F pad. I used them on street between track events without issue.

Because they are. Best thing to do is buy some EBC pads and better rotors. I don't know what color pads EBC to get. I'm planning to do my brakes as well soon and we'll start researching.

Be careful when buying brakes for the Stinger, if you buy anything cheaper than the originals you'll get a nasty judder within a couple thousand miles! I had to replace the disc and pads with EBC Yellow to get rid of it. The judder was awful.